How to Roll a Joint

Rolling a joint is a skill that takes practice to master. Here's a step-by-step guide on how to roll a basic cannabis joint:

**Materials You'll Need:**

- Cannabis flower (ground or broken down).

- Rolling papers (standard size is 1 1/4 inches).

- Filter tips or crutches (optional but recommended).

- A flat, clean surface to work on.

**Step 1: Prepare Your Materials:**

1. Grind or break down your cannabis flower into small, even pieces. The finer the grind, the easier it is to roll.

2. If you're using a filter tip (recommended for a better smoking experience), prepare it by folding it into an accordion shape, leaving a "W" shape at the end to hold onto.

**Step 2: Roll the Joint:**

3. Hold the rolling paper with the adhesive strip (glue) facing up and towards you. The folded edge should be on the bottom.

4. Place the filter tip (if using) at one end of the paper, leaving a little space from the edge.

5. Begin to evenly distribute the ground cannabis along the length of the paper. Make sure it's evenly spread from end to end, leaving a bit of space near the adhesive strip.

**Step 3: Shape and Pack the Joint:**

6. Gently and evenly shape the cannabis into a cylindrical form using your fingers. Use more pressure at the filter end and less at the tip.

7. Once the cannabis is evenly distributed, use your thumbs and index fingers to pinch the paper between them. Roll the paper back and forth between your fingers while gradually tucking it under the cannabis.

**Step 4: Seal the Joint:**

8. When the paper is rolled up to the adhesive strip, wet the glue by licking it or using a damp cloth. Be careful not to over-saturate; a small amount of moisture is sufficient.

9. Carefully press the glue strip onto the joint, sealing it shut. Use your fingers to apply gentle pressure along the seam to ensure a tight seal.

**Step 5: Shape and Finish:**

10. With your fingers, gently shape and pack the end of the joint to ensure it's evenly filled and tightly packed.

11. If you're using a filter tip, you can adjust it to control the draw. Ensure it's not too tightly packed against the cannabis.

**Step 6: Light and Enjoy:**

12. Your joint is now ready to be lit. Hold it at the unfiltered end and use a lighter or match to light the tip. Rotate the joint while lighting to ensure an even burn.

13. Inhale slowly and enjoy your cannabis.

Remember that rolling a perfect joint may take some practice, so don't be discouraged if your first attempts aren't perfect. Over time, you'll develop your technique and be able to roll joints to your liking.